Winbox

Winbox version 5.2.0 has the following features;

Download forfree....

Full version features:

• Discover MikroTik Routers /Switches /Appliances in yourcomputers subnet
• Connect to the MikroTik appliance using IP /layer 3 connection
• Connect to the MikroTik appliance using Ethernet /Mac /layer 2 connection
• Connections to the MikroTik appliance can be encrypted for added security

Quick Start Guide

1. Connect  your Windows computer directly to the router with an Ethernet cable, or connect them throught a switch.

2. Run Winbox program (Download from above), then click the [...] button.

3. The Winbox tool should find your Router anddisplay it's MAC address. * (If not see some troubleshooting below)

4. Click on the mac address part of the trext in the scan window. This will load the mac address into the connect to text box.

5. Press Connect and the Winbox GUI interface will be loaded up.

6. It is always advisable to configure an IP address on the interface you are connected to on. Once you have a valid ip address on the router that is reachable by your PC you should close down Winbox and reconnect by entering the IP address into the conect to box in in the Winbox loader rather than the Mac address that you origionally connnected. the reason for this is whe connected via the Mac layer communication is carried out via broacast traffic. This is a very unreliable method and may cause unexected disconnects from time to time. When you connect via an IP address you will have a more stabe TCP router connection to the router.

Click here to redirect Download Link